AVP Synthesizers RITMOBOX Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Sintetizador AVP Synthesizers RITMOBOX. AVP Synthesizers RITMOBOX 8 páginas. Analog drum synthesizer with 8-step sequencer
Imprimir página
Sequencer section
MIDI-channel selection setting
st
The 1
MIDI channel is set by default in RITMOBOX. To change it, turn off the
device then press and hold the START/STOP button, while continuing holding the
button turn on the device, continue holding it until the START/STOP starts
flashing.
The first MIDI note received from the MIDI controller will set the MIDI channel
number. After that, you need to Power off RITMOBOX and then turn it on again to
resume normal operation. Now the set MIDI channel will be stored in the device
memory.
START/STOP button
This button starts or stops the sequence playback. Sends START/STOP messages
to MIDI OUT.
Step selection button 8/16
st
The 8/16 LED indicator is not lit - only 1
8 steps are selected for programming.
The 8/16 LED indicator is lit - all 16 steps (1-16) are selected.
Step selection button 9-16
The 9-16 LED is not lit - first 8 steps are selected for programming.
The LED 9-16 is lit – 9-16 steps are available for programming.
8 buttons STEPS
Pressing one of the step buttons switches the state of this step to trigger note
on/off.
SOUND SELECTION button
This button selects one of the RITMOBOX's drum sections for editing on the
sequencer. Short pressing on the button allows to choose a specific sound for
programming on the steps.
TAP mode
th
You can enter into the TAP mode on the 5
press of SOUND SELECTION button
(all 5 led indicators will turn on). In this mode, the steps 1 – 5 represent the
sounds in the order of their priority: 1-CH, 2-OH, 3-G1, 4-G2, 5-G3. Just press on
the needed step to trigger/play it.
6
www.avpsynth.com