Aqua Perfecta Pura Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Sistemas de filtración de agua Aqua Perfecta Pura. Aqua Perfecta Pura 12 páginas.

8 Connecting The Water Inlet

The integrated adaptor comes with mains water supply and

adaptor connections.

Turn off the mains water by closing the angle valve under the

sink.

Unscrew the cold water pipe and then connect the integrated

adaptor to the angle valve.

Connect back the cold water pipe onto the other side

of the integrated valve.

Now unscrew the nut from the plug valve of the adaptor and

then insert the ¼" blue tube into the protruding ring.

Then screw the nut back to the plug valve.

Choose the best installation location before installation and, usually, the best installation location is in the

upper area of the sink drain pipe. Do not install in the corner area of the pipe!

Please follow the steps below:

Drill a 6mm hole on the sink drain pipe.

•

Seal foam rubber around the hole.

•

Fix together the two clamp rings (tighten with two screws).

•

Insert the nut on the blue tube.

•

Insert the blue tube into the port of the clamp.

•

Screw the nut tightly on the clamp ring.

•

AquaPerfecta.com

Integrated

Adaptor

Angle Valve

Cold water pipe

Plug valve

Nut

Angle Valve

0800 007 3737