Aqua Perfecta Pura Panduan Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Penyaringan Air Aqua Perfecta Pura. Aqua Perfecta Pura 12 halaman.
8 Connecting The Water Inlet
The integrated adaptor comes with mains water supply and
adaptor connections.
Turn off the mains water by closing the angle valve under the
sink.
Unscrew the cold water pipe and then connect the integrated
adaptor to the angle valve.
Connect back the cold water pipe onto the other side
of the integrated valve.
Now unscrew the nut from the plug valve of the adaptor and
then insert the ¼" blue tube into the protruding ring.
Then screw the nut back to the plug valve.
9 Drain Saddle Connecting
Choose the best installation location before installation and, usually, the best installation location is in the
upper area of the sink drain pipe. Do not install in the corner area of the pipe!
Please follow the steps below:
Drill a 6mm hole on the sink drain pipe.
•
Seal foam rubber around the hole.
•
Fix together the two clamp rings (tighten with two screws).
•
Insert the nut on the blue tube.
•
Insert the blue tube into the port of the clamp.
•
Screw the nut tightly on the clamp ring.
•
AquaPerfecta.com
Integrated
Adaptor
Angle Valve
Cold water pipe
Plug valve
Nut
Angle Valve
0800 007 3737