Aqua Products M3 Super Wrap Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Tienda Aqua Products M3 Super Wrap. Aqua Products M3 Super Wrap 8 páginas.

M3 SUPER WRAP Assembly

5. Working from the rear and using the pegs supplied with the wrap (NOT the bivvy's pegs) place

a peg in each ring and tension. The peg should mirror that of the bivvy but approximately 4" (or

10cm) behind the bivvy peg.

DO NOT PEG DOWN THE SIDES AT THIS STAGE.

6. Kneeling at the front of the bivvy/wrap hold the wrap at the base plate at the bottom of the

pole and pull forward keeping the pole in line with the three bivvy poles.

7. Now repeat the process on the other side - this ensures that the correct amount of tension

is applied to the pole.

8. Now place a peg in each remaining rings of the wrap, taking sufficient tension and ensuring

that no part of the wrap comes into contact with the bivvy panels.