Aqua Products M3 Super Wrap 사용 설명서 - 페이지 5

{카테고리_이름} Aqua Products M3 Super Wrap에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Products M3 Super Wrap 8 페이지.

M3 SUPER WRAP Assembly

5. Working from the rear and using the pegs supplied with the wrap (NOT the bivvy's pegs) place

a peg in each ring and tension. The peg should mirror that of the bivvy but approximately 4" (or

10cm) behind the bivvy peg.

DO NOT PEG DOWN THE SIDES AT THIS STAGE.

6. Kneeling at the front of the bivvy/wrap hold the wrap at the base plate at the bottom of the

pole and pull forward keeping the pole in line with the three bivvy poles.

7. Now repeat the process on the other side - this ensures that the correct amount of tension

is applied to the pole.

8. Now place a peg in each remaining rings of the wrap, taking sufficient tension and ensuring

that no part of the wrap comes into contact with the bivvy panels.