Aqua Pulse Spas AIRLIE LUXURY SPA Instrucciones - Página 3
Navegue en línea o descargue pdf Instrucciones para Bañera de hidromasaje Aqua Pulse Spas AIRLIE LUXURY SPA. Aqua Pulse Spas AIRLIE LUXURY SPA 5 páginas.
Imprimir páginaAlkalinity Increaser #4.
12g will raise the Total Alkalinity by approximately 10ppm.
Example reading is 60ppm and I want to get close to 100ppm
100ppm – 60ppm = 40ppm ÷ 10ppm = 4 x 12g = 48g to apply
Do not use more than 20g in one day it will bind the chemical to the shell & feel like sandpaper if you apply more.
Use a bucket and scoop some of the spas water into the bucket until it is roughly ¾ full, then add the Alkalinity Increaser
#4 to the bucket of water and stir (avoid contact with your skin), once dissolved pour the water from the bucket into the
spa and run jet 1 for 5 minutes.
If your reading is
higher than 120ppm
pH Reducer #6.
12g will lower the Total Alkalinity by approximately 10ppm.
Example reading is 150ppm and I want to get close to 100ppm
150ppm – 100ppm = 50ppm ÷ 10ppm = 5 x 12g = 60g to apply
Do not use more than 20g in one day it will bind the chemical to the shell & feel like sandpaper if you apply more.
Use a bucket and scoop some of the spas water into the bucket until it is roughly ¾ full, then add the pH Reducer #6 to
the bucket of water and stir (avoid contact with your skin), once dissolved pour the water from the bucket into the spa
and run jet 1 for 5 minutes.
HOW TO BALANCE pH ideal reading is between 7.2-7.8.
If your reading is
lower than 7.2
Alkalinity Increaser #4.
12g will raise the pH by approximately 10ppm. (10ppm = 1.0 from the reading)
Example reading is 7ppm and I want to get close to 7.5ppm
7.5ppm – 7ppm = 0.5ppm x 12g = 6g to apply
Do not use more than 20g in one day it will bind the chemical to the shell & feel like sandpaper if you apply more.
Use a bucket and scoop some of the spas water into the bucket until it is roughly ¾ full, then add the Alkalinity Increaser
#4 to the bucket of water and stir (avoid contact with your skin), once dissolved pour the water from the bucket into the
spa and run jet 1 for 5 minutes.
If your reading is
higher than 7.8
pH Reducer #6.
12g will lower the pH by approximately 10ppm. (10ppm = 1.0 from the reading)
Example reading is 8ppm and I want to get close to 7.5ppm
8ppm – 7.5ppm = 0.5ppm x 12g = 6g to apply
Do not use more than 20g in one day it will bind the chemical to the shell & feel like sandpaper if you apply more.
Use a bucket and scoop some of the spas water into the bucket until it is roughly ¾ full, then add the pH Reducer #6 to
the bucket of water and stir (avoid contact with your skin), once dissolved pour the water from the bucket into the spa
and run jet 1 for 5 minutes.
Visit: www.aquapulsespas.com.au
lower the total alkalinity by adding
raise the pH by adding
lower the pH by using