Abacus Electric Evolve Sonix Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Sistema de seguridad Abacus Electric Evolve Sonix. Abacus Electric Evolve Sonix 10 páginas. Wireless gsm alarm
- OUT1/OUT2: if the alarm output O1 is under the voltage (+5V), the warning light OUT 1 will go on; if the
alarm output O2 is under the voltage (+5V), the warning light OUT 2 will go on.
- SPEAKER: if the loudspeaker in the alarm main drive is working, the warning light Output3 will shine,
which means that you can hold a conversation with the base.
- RELAY: if the two relay outputs on the main drive are connected the relay warning light will go on.
- ALARM: if the siren is working, the siren warning light shines as well.
- MONITOR: if the wiretap function is active, the monitor warning light is also switched.
- STATUS: the alarm status.
- POWER: the alarm power supply.
How to set up the telephone numbers and SMS in the device?
EVOLVE Sonix is possible to control comfortably also using your smartphone:
- Android – EVOLVE Sonix (Google Play)
- iPhone – EVOLVE Sonix (App Store)
You can set 5 groups of the telephone numbers and 7 SMS types by sending the message into the alarm.
The format of the command is always: password#operation code#content#
Examples:
- 123456#51#13905950001# will save the telephone number for the first group into the alarm
- 123456#52#13905950002# will save the telephone number for the second group into the alarm
- 123456#53#13905950003# will save the telephone number for the third group into the alarm
- 123456#54#13905950004# will save the telephone number for the fourth group into the alarm
- 123456#55#13905950005# will save the telephone number for the fifth group into the alarm
There are seven preset SMS types available, but you can change them. The first five messages are for
setting the wireless detectors for the zones 1-5. The sixth message is for the wireless detectors of the
zones 6-16. The seventh message is for the wire ports I1, I2, I3.
- When the first wireless sensor connects, this SMS will be send: Wireless Activated (01)
- When the second wireless sensor connects, this SMS will be send: Wireless Activated (02)
- When the third wireless sensor connects, this SMS will be send: Wireless Activated (03)
- When the fourth wireless sensor connects, this SMS will be send: Wireless Activated (04)
- When the fifth wireless sensor connects, this SMS will be send: Wireless Activated (05)
- When the sixth up to sixteenth wireless sensor connects, this SMS will be send: Wireless Activated
(i); i=6-16
- When the seventh wire sensor connects, this SMS will be send: Wire Activated (i); i=1-3, for the
alarm ports 1-3
You can send the message for overwriting the existing seven types of the SMS to the alarm. Each message
can have 24 characters of the English alphabet at the maximum:
- 123456#81#The front door opened# will save the first SMS message that is sent after connecting
the first wireless detector
- 123456#81#The middle door opened# will save the second SMS message that is sent after
connecting the second wireless detector
- 123456#81#The back door opened# will save the third SMS message that is sent after connecting
the third wireless detector
46