- ページ 5

セキュリティシステム Abacus Electric Evolve SonixのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abacus Electric Evolve Sonix 10 ページ。 Wireless gsm alarm

- OUT1/OUT2: if the alarm output O1 is under the voltage (+5V), the warning light OUT 1 will go on; if the

alarm output O2 is under the voltage (+5V), the warning light OUT 2 will go on.

- SPEAKER: if the loudspeaker in the alarm main drive is working, the warning light Output3 will shine,

which means that you can hold a conversation with the base.

- RELAY: if the two relay outputs on the main drive are connected the relay warning light will go on.

- ALARM: if the siren is working, the siren warning light shines as well.

- MONITOR: if the wiretap function is active, the monitor warning light is also switched.

- STATUS: the alarm status.

- POWER: the alarm power supply.

How to set up the telephone numbers and SMS in the device?

EVOLVE Sonix is possible to control comfortably also using your smartphone:

- Android – EVOLVE Sonix (Google Play)

- iPhone – EVOLVE Sonix (App Store)

You can set 5 groups of the telephone numbers and 7 SMS types by sending the message into the alarm.

The format of the command is always: password#operation code#content#

Examples:

- 123456#51#13905950001# will save the telephone number for the first group into the alarm

- 123456#52#13905950002# will save the telephone number for the second group into the alarm

- 123456#53#13905950003# will save the telephone number for the third group into the alarm

- 123456#54#13905950004# will save the telephone number for the fourth group into the alarm

- 123456#55#13905950005# will save the telephone number for the fifth group into the alarm

There are seven preset SMS types available, but you can change them. The first five messages are for

setting the wireless detectors for the zones 1-5. The sixth message is for the wireless detectors of the

zones 6-16. The seventh message is for the wire ports I1, I2, I3.

- When the first wireless sensor connects, this SMS will be send: Wireless Activated (01)

- When the second wireless sensor connects, this SMS will be send: Wireless Activated (02)

- When the third wireless sensor connects, this SMS will be send: Wireless Activated (03)

- When the fourth wireless sensor connects, this SMS will be send: Wireless Activated (04)

- When the fifth wireless sensor connects, this SMS will be send: Wireless Activated (05)

- When the sixth up to sixteenth wireless sensor connects, this SMS will be send: Wireless Activated

(i); i=6-16

- When the seventh wire sensor connects, this SMS will be send: Wire Activated (i); i=1-3, for the

alarm ports 1-3

You can send the message for overwriting the existing seven types of the SMS to the alarm. Each message

can have 24 characters of the English alphabet at the maximum:

- 123456#81#The front door opened# will save the first SMS message that is sent after connecting

the first wireless detector

- 123456#81#The middle door opened# will save the second SMS message that is sent after

connecting the second wireless detector

- 123456#81#The back door opened# will save the third SMS message that is sent after connecting

the third wireless detector