CPC SS-100 Manual de instalación y programación - Página 10

Navegue en línea o descargue pdf Manual de instalación y programación para Servidor CPC SS-100. CPC SS-100 13 páginas. Serial server

Imprimir página

Configuring the SS-

100 for REFLECS Con-

trollers

To connect the setup computer or terminal to the SS-

100, use the 10' serial cable, DB25/DB9 STC adapter, DB9

female/female STC gender changer, the DB25 null modem

adapter, and the 110VAC/5VDC power transformer.

Equipment included with the SS-100 kit:

• 110VAC/5VDC power transformer

• 10' DB9 serial cable

• DB25/DB9 straight through connector (STC)

• 535-1190 DB9 computer to REFLECS controller

laptop cable

• DB25 null modem adapter

• DB9 female/female STC gender changer

• COM Port Redirector Software Version 1.2/6

• Installation Guide

SS-100 Operating Requirements:

• RJ45 connection to a TCP/IP Network

• Static IP Address

SS-100 Setup Requirements:

• IBM PC running Windows 9x/NT with HyperTer-

minal installed or any VT100 serial terminal

Requirements for computers connecting to SS-100:

• IBM PC running Windows 9x/NT set up on an IP

network

• COM Port Redirector installed and set up

• CD-ROM drive

• UltraSite version 3.00 or higher

Requirements for operating COM Port Redirector

Software:

• IBM PC running Windows 9x/NT set up on an IP

network

• CD-ROM drive

3.1.

Connect the Setup Computer

or Terminal to the SS-100

Connect 25-pin female end of DB25 null mo-

dem adapter to the 25-pin male port of the

SS-100.

10 • Connect the Setup Computer or Terminal to the SS-100

Connect 25-pin female end of DB25/DB9

STC adapter to the 25-pin male end of the

DB25 null modem adapter.

Note: Screws on the DB25 null modem adapter may

need to be reversed for a correct connection with the

DB25/DB9 STC adapter.

Connect female end of the 10' serial cable to

the male end of DB25/DB9 STC adapter.

Connect DB9 female/female STC gender

changer to the male end of the 10' serial ca-

ble.

Connect the other end of the DB9 female/fe-

male STC gender changer to the male 9-pin

COM port of the computer or terminal to be

used the SS-100 setup.

Plug 110VAC/5VDC power transformer into

the SS-100.

Note: Make certain that you have the DB25 null modem

adapter installed on your serial cable connection or you

will be unable to communicate with the SS-100.

3.2.

Set up Windows HyperTer-

minal for a Direct Connec-

tion to the SS-100

Set up Windows HyperTerminal to connect directly to

the SS-100. If you are using another type of VT100 termi-

nal, use the settings 9600/8/N/1 and proceed to Section

3.3., Set up SS-100 From the Local_1> Command Prompt

of this manual.

Make certain that you don't have any soft-

ware running that utilizes the COM ports.

Start HyperTerminal for Windows 98:

Select Start|Programs|Accessories|Communica-

tions|HyperTerminal to bring up the HyperTerminal fold-

er, and then run HyperTerminal.exe by double-clicking the

Hypertrm icon.

Start HyperTerminal for Windows NT 4.0:

Select Start|Programs|Accessories|HyperTermi-

nal|HyperTerminal.

In the Connection Description dialog box

enter the name you would like to use for this

connection (i.e. Direct to Serial Port), and

click OK.

In the Connect To dialog box under the Con-

nect using dropdown list, you should select a

direct connection to the COM port that you

connected the SS-100 to in Step 5 from the

Section 3.1., Connect the Setup Computer or

Terminal to the SS-100 of this manual (i.e.

026-1607 Rev 2 4-04-01