DFI EC700-BT Manual de instalación rápida - Página 2

Navegue en línea o descargue pdf Manual de instalación rápida para PC industrial DFI EC700-BT. DFI EC700-BT 4 páginas.
También para DFI EC700-BT: Manual de instalación (4 páginas)

Imprimir página

Installing a 2.5" SATA Drive

1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and

remove the 4 mounting screws that secure the HDD bracket to the system board.

SATA drive bay

2. Connect the SATA cable to the SATA drive first before affixing the SATA HDD on the bracket. Align

the mounting holes of the SATA drive with the mounting holes on the HDD bracket and use the 3

provided mounting screws to secure the drive in place. Note that you should install the drive by

affixing only 3 screws to the desired screw holes indicated in the picture below.

Screw

Quick Installation Guide |

2.5" SATA drive

Mounting Screw

SATA data cable

SATA power cable

Mounting Screws (4x)

Mounting Screws (3x)