DFI EC700-BT Руководство по быстрой установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Промышленный компьютер DFI EC700-BT. DFI EC700-BT 4 страницы.
Также для DFI EC700-BT: Руководство по установке (4 страниц)

Печатать страницу

Installing a 2.5" SATA Drive

1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and

remove the 4 mounting screws that secure the HDD bracket to the system board.

SATA drive bay

2. Connect the SATA cable to the SATA drive first before affixing the SATA HDD on the bracket. Align

the mounting holes of the SATA drive with the mounting holes on the HDD bracket and use the 3

provided mounting screws to secure the drive in place. Note that you should install the drive by

affixing only 3 screws to the desired screw holes indicated in the picture below.

Screw

Quick Installation Guide |

2.5" SATA drive

Mounting Screw

SATA data cable

SATA power cable

Mounting Screws (4x)

Mounting Screws (3x)