Allied Telesis CentreCOM GS980M/52PS Manual de instalación rápida - Página 10
Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Allied Telesis CentreCOM GS980M/52PS. Allied Telesis CentreCOM GS980M/52PS 20 páginas. Gigabit ethernet switches
Imprimir página
To install the switch on the wall, perform the following procedure:
1. Place the switch in a table.
2. Install the four wall/equipment rack brackets to the sides of the
unit with the sixteen M3x6mm screws included with the switch.
Note: If you need to drill holes in the wall for the screws, perform
steps 3 to 7. Otherwise, go to step 8.
3. Have a person hold the switch on the wall at the selected location
while you use a pencil to mark the wall with the locations of the
four screw holes in the four brackets (one screw per bracket).
4. Place the switch on a table or desk.
5. Use the stud finder to check for hot electrical wires at the
locations of the screw holes.
10
CentreCOM GS980M Series Quick Installation Guide