- ページ 10

スイッチ Allied Telesis CentreCOM GS980M/52PSのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Allied Telesis CentreCOM GS980M/52PS 20 ページ。 Gigabit ethernet switches

ページを印刷する

Allied Telesis CentreCOM GS980M/52PS クイック・インストール・マニュアル

To install the switch on the wall, perform the following procedure:

1. Place the switch in a table.

2. Install the four wall/equipment rack brackets to the sides of the

unit with the sixteen M3x6mm screws included with the switch.

Note: If you need to drill holes in the wall for the screws, perform

steps 3 to 7. Otherwise, go to step 8.

3. Have a person hold the switch on the wall at the selected location

while you use a pencil to mark the wall with the locations of the

four screw holes in the four brackets (one screw per bracket).

4. Place the switch on a table or desk.

5. Use the stud finder to check for hot electrical wires at the

locations of the screw holes.

CentreCOM GS980M Series Quick Installation Guide