DG UDP10G-IP Manual de instalación - Página 14
Navegue en línea o descargue pdf Manual de instalación para Placa base DG UDP10G-IP. DG UDP10G-IP 18 páginas. Fpga setup with cpu demo
Imprimir páginadg_toeudp10gip_fpgasetup_intel.doc
2) Connect micro USB cable of each FPGA board to PC. After that, PC detects two
USB-Blaster cables as USB-1 and USB-2 from two USB connections with two FPGA
boards. Follow step 6) of topic 1 (Test environment setup when using FPGA and PC) for
FPGA configuration.
Figure 2-3 Two USB-Blaster cables when connecting two FPGA boards to PC
3) Open QuartusII Programmer to program FPGA board#1 by using USB-1 connection and
then switch to program FPGA board#2 by using USB-2 connection.
26-Aug-20
Figure 2-4 Select USB-BlasterII
Page 14