DG UDP10G-IP Manual de instalación - Página 15
Navegue en línea o descargue pdf Manual de instalación para Placa base DG UDP10G-IP. DG UDP10G-IP 18 páginas. Fpga setup with cpu demo
Imprimir páginadg_toeudp10gip_fpgasetup_intel.doc
4) Open NiosII Command Shell.
a. Run nios2-terminal --cable 1 command for FPGA#1
b. Run nios2-terminal –cable 2 command for FPGA#2
5) Set the input to the console.
a. Set '1' on Serial console of FPGA board#1 for running server mode.
b. Set '0' on Serial console of FPGA board#2 for running client mode.
c. Default parameters for server or client are displayed on the console, as shown in
Figure 2-6.
26-Aug-20
Figure 2-5 Run NiosII terminal on two consoles
Figure 2-6 Input mode
Page 15