DG UDP10G-IP 설정 매뉴얼 - 페이지 15
{카테고리_이름} DG UDP10G-IP에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DG UDP10G-IP 18 페이지. Fpga setup with cpu demo
dg_toeudp10gip_fpgasetup_intel.doc
4) Open NiosII Command Shell.
a. Run nios2-terminal --cable 1 command for FPGA#1
b. Run nios2-terminal –cable 2 command for FPGA#2
5) Set the input to the console.
a. Set '1' on Serial console of FPGA board#1 for running server mode.
b. Set '0' on Serial console of FPGA board#2 for running client mode.
c. Default parameters for server or client are displayed on the console, as shown in
Figure 2-6.
26-Aug-20
Figure 2-5 Run NiosII terminal on two consoles
Figure 2-6 Input mode
Page 15