Avsl qtx 151.554UK Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Avsl qtx 151.554UK. Avsl qtx 151.554UK 14 páginas. Stereo twin par bar with foot control

Imprimir página

DMX Connection and Control

The PAR Bar can be connected as a daisy chain by using standard XLR cables. The

units are labelled with DMX IN and DMX OUT –

Connect the DMX controller output to the DMX IN on the first unit. Then connect

the first unit's DMX OUT to DMX IN on the next unit, and so on if there are more

units. A DMX starting address must be assigned to each fixture; allowing the DMX

controller to control each fixture individually. This fixture has 13 channels so the first

unit should be assigned with an address of 001, the next unit should be 014 (13+1)

and next one at 027 (2x13+1) etc. All fixtures can be set to the same address, this

way all connected the fixtures will be act in unison. Please refer to the DMX tables

for the function and features.

DMX Terminator

If there are many lines or lights, it is recommended to use a DMX terminator to

prevent DMX signal corruption, the DMX terminator is an simple XLR plug with a 120

Ω resistor connected between pins 2 and 3,which is then plugged into the output

XLR socket of the last fixture in the chain.

151.554UK User Manual