Avsl qtx 151.554UK Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt dla DJ-ów Avsl qtx 151.554UK. Avsl qtx 151.554UK 14 stron. Stereo twin par bar with foot control
Drukuj stronę
DMX Connection and Control
The PAR Bar can be connected as a daisy chain by using standard XLR cables. The
units are labelled with DMX IN and DMX OUT –
Connect the DMX controller output to the DMX IN on the first unit. Then connect
the first unit's DMX OUT to DMX IN on the next unit, and so on if there are more
units. A DMX starting address must be assigned to each fixture; allowing the DMX
controller to control each fixture individually. This fixture has 13 channels so the first
unit should be assigned with an address of 001, the next unit should be 014 (13+1)
and next one at 027 (2x13+1) etc. All fixtures can be set to the same address, this
way all connected the fixtures will be act in unison. Please refer to the DMX tables
for the function and features.
DMX Terminator
If there are many lines or lights, it is recommended to use a DMX terminator to
prevent DMX signal corruption, the DMX terminator is an simple XLR plug with a 120
Ω resistor connected between pins 2 and 3,which is then plugged into the output
XLR socket of the last fixture in the chain.
8
151.554UK User Manual