CPS IAQPRO SmartAir Manual de inicio rápido y resolución de problemas - Página 6

Navegue en línea o descargue pdf Manual de inicio rápido y resolución de problemas para Instrumentos de medida CPS IAQPRO SmartAir. CPS IAQPRO SmartAir 8 páginas. Professional indoor air quality meter
También para CPS IAQPRO SmartAir: Manual del usuario (18 páginas), Manual del usuario (9 páginas)

Imprimir página

CPS IAQPRO SmartAir Manual de inicio rápido y resolución de problemas

AIR QUALITY (Issues, Causes, Solutions) Cont'd

Indoor Air Quality

Issues

In the summer, conden-

sation forms on ducts, air

High Or Low Dew

diffusers, walls or ceilings

Point

In the winter, condensation

forms inside exterior walls

TROUBLESHOOTING GUIDE

Problem

Light Bar

Light bar doesn't turn on

What do light bar colors

indicate?

CPS Link App

CPS Link App crashes

Can't pair phone or tablet

to SmartAir

Remote Operation

Can't connect with mobile

device

Low Or High Temperature

Or Humidity Readings

Potential Causes

Ensure AC system is proper size (tons)

and functioning properly. Check ductwork

or building envelope for leaks. Determine

if insulation missing

Possible Solution

Ensure power cord plugged into wall outlet that is receiving power.

See label on back of SmartAir housing for color explanations (or see #

3b in Quick Start Instructions above)

Flashing Red- SmartAir is in start up mode.

Alternating Green/Red- SmartAir sensor baseline not set up. See "Set

tVOC Sensor Baseline" instructions.

Alternating Green/Yellow- Wait 5 to 60 minutes for tVOC sensor to

warm up.

Blue flash (once every 5 seconds): SmartAir is paired to your mobile

device with the CPS Link app.

Ensure mobile device is Bluetooth compatible, and Bluetooth setting

ON in mobile device

Delete the CPS Link app from your mobile device. Then reinstall the

latest CPS Link app (from App Store or Google Play) on your mobile

device

From App Store or Google Play, download the latest CPS Link app on

your mobile device and pair it to the SmartAir.

Mobile device must be ≤ 150 ft (46m) from CPS SmartAir

Reset SmartAir by unplugging and plug in. Then pair to mobile device

Mobile device must be ≤ 100 ft (30m) from SmartAir (direct line of

sight)

Charge mobile device battery

If SmartAir has been stored in temperature extremes, it must be

placed indoors, inplugged in NORMAL TEMPERATURE AND HUMIDITY

conditions for 6~8 hours before being powered ON.