Avtech AVM332 Manual - Página 4

Navegue en línea o descargue pdf Manual para Cámara de seguridad Avtech AVM332. Avtech AVM332 16 páginas.

QUICK GUIDE

For more product details, please visit

www.surveillance-download.com/user/m521.swf

 INSTALLATION

Step 1: Separate the dome cover from

the camera.

Step 2: Make sure the screw holes on the

plate are aligned with the holes

on the camera base. If not,

slightly loosen the two screws on

the plate and rotate it.

Step 3: Mark the locations of the two screw holes on the ceiling or wall, and drill a hole for each on the ceiling or wall. The distance between

your camera and the location you want to monitor should be 3 ~ 4 meters.

Step 4: Fix the camera to the ceiling or wall with the supplied screws.

Step 5: Connect your camera to power.

Step 6: Pan, tilt and rotate the lens itself to adjust the position and viewing angle of the camera, and fasten the two screws on the plate to fix.

Note: You don't need to manually pan the type with motorized pan.

Step 7: Replace the dome cover back to the camera.

Note: Please wipe the inner part of the dome cover against the lens for clear images.

 PACKAGE CONTENTS

Before starting to set up your camera, please make sure items below are in your

box:

 Standard package:

Camera

Quick Guide

 Optional accessories:

Screws & Wall Plugs

Wrench

Type 1

 Camera Overview

Type 1

Side View (depending on the model you use )

Step 1: Separate the dome cover from the camera.

Squeeze two sides of the dome cover as located and indicated below, and

move it upward to remove.

Step 2: Place the camera to where you want to install, on the ceiling or wall, and

mark the points for screws.

Step 3: (Optional) When the cable is arranged to walk along the wall, find and cut

as indicated below to let the cable out.

Step 4: Fix the camera to the ceiling or wall with the supplied screws.

Step 5: Connect your camera to power.

(TURN BACK TO CONTINUE)

Type 2

m521a_504a_311_511_328c_428c_328d_428d quick_V1.2

583Z