Avtech AVM332 Manual - Página 6

Navegue en línea o descargue pdf Manual para Cámara de seguridad Avtech AVM332. Avtech AVM332 16 páginas.

Imprimir página

QUICK GUIDE

For more product details, please visit

www.surveillance-download.com/user/m521.swf

 Installation (Continued)

Step 4: The lens can be adjusted in three ways:

a. Take turn to pan the camera.

Pan

 Package Contents

Before starting to set up your camera, please make sure items below are in your box:

 Standard package:

Camera

Quick Guide

 Optional accessories:

Screws, Wall

Desiccants

Plugs, Rubber

Wrench

(×2)

Rings (×3)

b. Tilt the lens after loosening the two plastic

screws on either side of the lens.

Tilt

(TURN BACK TO CONTINUE)

Waterproof accessory kit

c. Remove the protective case by loosening the two

screws on it before rotating the lens from behind.

Rotate

 Installation

Step 1: Uncover the dome camera by loosening the three screws on the housing with the

supplied wrench.

Note: The three screws aren't designed to be removed from the housing.

Step 2: Attach the supplied installation sticker to your desired installation location.

Step 3: Locate the three deepest holes on the base. (See Pic 1.) They are where the three

supplied screws belong.

On the sticker, make holes where the three screws and the cables are supposed to

penetrate. However, if the cables won't go through the surface, you don't need to

make the hole for them in advance. Next, align the camera with the sticker, putting

the three screws through the holes, as well as the cables—if necessary. Then,

tighten the screws.

Pic 1

Step 5: Be sure to replace the original desiccant(s) with the new ones. Use

provided double-sided tape to stick the desiccants in place as

illustrated below. Keep them inward enough for the housing to close

nicely. The new desiccants must not be exposed to air for over 30

seconds.

Note: Both the two new desiccants are to be put in the camera to remove

excessive humidity and ensure the camera works well.

Step 6: Then, clear the lens of fingerprints and replace the housing before

tightening the screws on it.

Note: To prevent the fuzzy image due to the IR reflection, please keep the

transparent cover clear.

Step 7: Power up the camera.

651Z

m542a_m542b_542f_quick_V1.3