Allied Telesis SwitchBlade AT-AR440S Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Enrutador de red Allied Telesis SwitchBlade AT-AR440S. Allied Telesis SwitchBlade AT-AR440S 11 páginas. For typical network scenarios
También para Allied Telesis SwitchBlade AT-AR440S: Ficha de datos (1 páginas), Ficha de datos (5 páginas), Ficha de datos (3 páginas), Ficha de datos (3 páginas), Ficha de datos (2 páginas), Folleto (6 páginas)

Imprimir página

Allied Telesis SwitchBlade AT-AR440S Manual de instalación

ATM settings

If the ATM settings are not correct for your ADSL Provider, you can correct them using the VPI,

VCI and Encapsulation fields at the bottom of the page.

In our example below, you can see the default VPI and Encapsulation settings for the UK are zero

and 38 respectively.

If applicable you should also add your PPP username and password, or your static IP address. You

will notice that when selecting PPPoA or PPPoE that the IP address fields are "greyed out", because

dynamic allocation is assumed. If you still need static IP addresses, this can be accessed via the GUI's

Configuration > IP menu.

Ensure Enable Firewall is ticked as this will provide a stateful inspection firewall, and NAT

solution.

Set up your AT-AR440S ADSL Router for Typical Network Scenarios