Allied Telesis SwitchBlade AT-AR440S 설정 매뉴얼 - 페이지 9
{카테고리_이름} Allied Telesis SwitchBlade AT-AR440S에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis SwitchBlade AT-AR440S 11 페이지. For typical network scenarios
Allied Telesis SwitchBlade AT-AR440S에 대해서도 마찬가지입니다: 데이터시트 (1 페이지), 데이터시트 (5 페이지), 데이터시트 (3 페이지), 데이터시트 (3 페이지), 데이터시트 (2 페이지), 브로셔 (6 페이지)
페이지 인쇄
ATM settings
If the ATM settings are not correct for your ADSL Provider, you can correct them using the VPI,
VCI and Encapsulation fields at the bottom of the page.
In our example below, you can see the default VPI and Encapsulation settings for the UK are zero
and 38 respectively.
If applicable you should also add your PPP username and password, or your static IP address. You
will notice that when selecting PPPoA or PPPoE that the IP address fields are "greyed out", because
dynamic allocation is assumed. If you still need static IP addresses, this can be accessed via the GUI's
Configuration > IP menu.
Ensure Enable Firewall is ticked as this will provide a stateful inspection firewall, and NAT
solution.
Set up your AT-AR440S ADSL Router for Typical Network Scenarios
9