Dell 3250 Manual del producto - Página 21

Navegue en línea o descargue pdf Manual del producto para Portátil Dell 3250. Dell 3250 37 páginas. Product guide (.pdf)
También para Dell 3250: Información actualizada (32 páginas), Manual del usuario (39 páginas), Manual del usuario (39 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

Intel® Server Platform SR870BH2

Error

Error Message and Character

Code

Attributes

8121

Processor 02: Thermal trip

failure. WARN/YELLOW_BLACK

8130

Processor 01: Disabled

WARN/YELLOW_BLACK

8131

Processor 02: Disabled

WARN/YELLOW_BLACK

8140

Processor 01: failed FRB level 3

timer WARN/YELLOW_BLACK

8141

Processor 02: failed FRB level 3

timer WARN/YELLOW_BLACK

8150

Processor 01: failed initialization

on last boot

WARN/YELLOW_BLACK

8151

Processor 02: failed initialization

on last boot

WARN/YELLOW_BLACK

8192

L3 cache size mismatch

WARN/YELLOW_BLACK

8193

CPUID, Processor Steppings are

different

WARN/YELLOW_BLACK

8196

Processor Models are Different

DFLT/RED_BLACK

Revision 1.1

BIOS POST Error Codes and Messages

Pause on

Boot

Yes

Processor 02 has exceeded the thermal diode

temperature limit resulting in a thermal trip event,

check for airflow obstructions to fans and heat sinks.

Ensure processor air duct is present and secured. The

system is designed to run heavy loads up to 35C or

96F ambient. However, Under normal (i.e. no fan

failure) conditions, the CPU should not throttle until

42C/ 107F. (With a fan failure, throttling could possibly

occur at about 27C) Thermal trip should occur at 50C

/120F, thermal trip will shut down the processor or

system. If this occurs and the ambient temp is far

cooler - Refer to "Processor" in Debug Methodology

and failure Isolation section.

Yes

Processor failed to initialize in time, Refer to Refer to

"Fault Resilient Boot" in Debug Methodology and

failure Isolation section.

Yes

Processor failed to initialize in time, Refer to Refer to

"Fault Resilient Boot" in Debug Methodology and

failure Isolation section.

Yes

Processor failed: Fault Resilient Boot Timer (FRB)

expired. Refer to Refer to "Fault Resilient Boot" in

Debug Methodology and failure Isolation section.

Yes

Processor failed: Fault Resilient Boot Timer (FRB)

expired. Refer to Refer to "Fault Resilient Boot" in

Debug Methodology and failure Isolation section.

Yes

Processor failed to initialize in time, Refer to Refer to

"Fault Resilient Boot" in Debug Methodology and

failure Isolation section.

Yes

Processor failed to initialize in time, Refer to Refer to

"Fault Resilient Boot" in Debug Methodology and

failure Isolation section.

BIOS compared Processors and determined an L3

cache mismatch; both processors should run with

different cache sizes. If both processors are identical -

Refer to "Processor" in Debug Methodology and failure

Isolation section.

BIOS compared Processors and determined a

mismatch, both processors may run – If different

speeds they will be Performance restricted, both will

run at lower of the two speeds, If incompatible - one

processor may be disabled. Check stepping and P/N

information – Dissimilar stepping processors are not

supported. Refer to "Processor" in Debug

Methodology and failure Isolation section.

Yes

BIOS compared Processors and determined a

mismatch, both processors may run – If different

speeds they will be Performance restricted, both will

run at lower of the two speeds, If incompatible - one

processor may be disabled. Check stepping and P/N

information – Dissimilar stepping and mixed family

processors are not supported. Refer to "Processor" in

Debug Methodology and failure Isolation section.

Failure