Dell Inspiron 1300 Manual de servicio - Página 13
Navegue en línea o descargue pdf Manual de servicio para Portátil Dell Inspiron 1300. Dell Inspiron 1300 45 páginas.
También para Dell Inspiron 1300: Manual de servicio (45 páginas)
Imprimir página1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the
ZIF socket.
When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher
than the others, the module is not seated correctly.
NOTICE:
Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.
3. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper towel.
4. Replace the microprocessor thermal-cooling assembly. See
5. Update the BIOS using a flash BIOS-update program CD. See
Back to Contents Page
Installing the Microprocessor Thermal- Cooling
Flashing the BIOS From a
CD.
Assembly.