Dell Inspiron 1300 Servis Kılavuzu - Sayfa 13

Dizüstü Bilgisayar Dell Inspiron 1300 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Inspiron 1300 45 sayfaları.
Ayrıca Dell Inspiron 1300 için: Servis Kılavuzu (45 sayfalar)

Sayfayı Yazdır

1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the

ZIF socket.

When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher

than the others, the module is not seated correctly.

NOTICE:

Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.

2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.

3. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper towel.

4. Replace the microprocessor thermal-cooling assembly. See

5. Update the BIOS using a flash BIOS-update program CD. See

Back to Contents Page

Installing the Microprocessor Thermal- Cooling

Flashing the BIOS From a

CD.

Assembly.