Avtech TMP-SDT-SEN Nota de instalación - Página 2
Navegue en línea o descargue pdf Nota de instalación para Accesorios Avtech TMP-SDT-SEN. Avtech TMP-SDT-SEN 5 páginas. Difgital temperature & analog sensor
Imprimir páginaDigital Temperature & Analog Sensor (RMA-DTA-SEN)
1. Connect one end of the RJ-11 cable to the Digital Port on the Digital Temperature &
Analog Sensor box.
2. Run the built-in 25' cable back to your Room Alert. Try to avoid running it near large
electromagnetic devices or fluorescent lights, which produce EMI that can interfere with
RJ-11 Extension Cable & Coupler (ECC-25E-SEN)
You may extend your digital sensor up to 100' away
from your Room Alert. AVTECH stocks the 25' RJ-11
Extension Cable & Coupler (ECC-25E-SEN), shown
here, for this purpose. Please contact your Product
Specialist to purchase this extension cable.
Step 3: Connect your Digital Temperature & Analog Sensor to an analog sensor.
Do not connect the analog inputs on AVTECH products or other electrical appliances
to live circuits of over 5 VDC.
Use only low-voltage 2-wire cable to connect dry contacts.
1. Separate and strip both ends of a low-voltage, two-wire cable (such as speaker wire).
Expose about ¼" of wire.
2. Connect one set of leads to the analog input port on the Temperature &
Analog Sensor. Note that the port is polarized: the left contact is negative
(-) and the right is positive (+), when viewed with grey push clip up.
3. Connect the +/- wires to the matching +/- contacts on an analog sensor, such as
AVTECH's Current Loop.
Configure Your Digital Temperature & Analog Sensor
With Room Alert's Built-In Web Interface
Navigate to
Settings
options you see below will vary depending on the model.
AVTECH Software, Inc.
sensor readings.
3. Plug the free end of the RJ-11 cable into an RJ-11 port on
your Room Alert.
You may use any two-wire low-voltage cable to connect the analog
input port to the analog output port on your analog sensor.
AVTECH stocks 25' speaker wire for this purpose; please contact
your Product Specialist to purchase this cable.
Sensors
in the web interface of your Room Alert monitor. The
Page 2 of 5
RJ-11 Extension Cable & Coupler
ECC-25E-SEN
AVTECH.com