Dell PowerEdge 2550 Instrucciones de instalación de la estantería - Página 21

Navegue en línea o descargue pdf Instrucciones de instalación de la estantería para Portátil Dell PowerEdge 2550. Dell PowerEdge 2550 40 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 2550: Manual de instalación (26 páginas), Manual de instalación (32 páginas), Manual de configuración (10 páginas), Manual de activación (32 páginas), Manual de instalación (32 páginas), Manual (28 páginas), Manual (15 páginas)

F i g u r e 1 - 1 1 . I n s t a l l i n g t h e S l i d e A s s e m b l i e s f o r C e n t e r - M o u n t

C o n f i g u r a t i o n

12-24 x 0.5-inch

Phillips screw

(2 per bracket)

shoulder

washer

(2 per bracket)

locking nut

(2 per bracket)

Flush-Mount Installation

To prepare the RapidRails slide assemblies for flush-mount installation in the 2-post rack,

perform the following steps:

Locate the left slide assembly and place it on a smooth work surface. Place the right

slide assembly to the right of the left slide assembly. Position both rails so that the

center brackets are facing upwards.

NOTE: The slide assemblies are factory configured for center-mount use. For flush-mount

installation, you must remove, rotate 180 degrees, and reinstall the mounting bracket on

the opposite slide assembly.

Remove two locking nuts and two shoulder washers from each center bracket.

right slide

assembly

Ra c k In s ta l lati on Gui de

1-15