Dell Vostro 3460 Manual del usuario - Página 28
Navegue en línea o descargue pdf Manual del usuario para Portátil Dell Vostro 3460. Dell Vostro 3460 47 páginas. Document
También para Dell Vostro 3460: Información sobre configuración y características (8 páginas), Manual del usuario (47 páginas), Configuración y especificaciones (23 páginas)
NOTE:
Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
Navigation keys
The following table displays the system setup navigation keys.
NOTE:
For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the
system.
Table 1. Navigation keys
Keys
Navigation
Up arrow
Moves to the previous field.
Down arrow
Moves to the next field.
Enter
Allows you to select a value in the selected field (if applicable) or follow the link in the field.
Spacebar
Expands or collapses a drop‐down list, if applicable.
Tab
Moves to the next focus area.
Esc
Moves to the previous page till you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
F1
Displays the System Setup help file.
System Setup overview
System Setup allows you to:
•
Change the system configuration information after you add, change, or remove any hardware in your computer.
•
Set or change a user-selectable option such as the user password.
•
Read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference.
CAUTION:
Unless you are an expert computer user, do not change the settings for this program. Certain changes can cause your
computer to work incorrectly.
Accessing System Setup
1
Turn on (or restart) your computer.
2
After the white Dell logo appears, press F2 immediately.
The System Setup page is displayed.
NOTE:
If you wait too long and the operating system logo appears, wait until you see the desktop. Then, shut down or
restart your computer and try again.
NOTE:
After the Dell logo appears, you can also press F12 and then select BIOS setup.
28
System Setup
NOTE:
For the standard graphics browser only.