Dell Vostro 3460 소유자 매뉴얼 - 페이지 28

{카테고리_이름} Dell Vostro 3460에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 3460 47 페이지. Document
Dell Vostro 3460에 대해서도 마찬가지입니다: 설정 및 기능 정보 (8 페이지), 소유자 매뉴얼 (47 페이지), 설정 및 사양 (23 페이지)

페이지 인쇄

NOTE:

Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup screen.

Navigation keys

The following table displays the system setup navigation keys.

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the

system.

Table 1. Navigation keys

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

Enter

Allows you to select a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop‐down list, if applicable.

Tab

Moves to the next focus area.

Esc

Moves to the previous page till you view the main screen. Pressing Esc in the main screen displays a message

that prompts you to save any unsaved changes and restarts the system.

Displays the System Setup help file.

System Setup overview

System Setup allows you to:

•

Change the system configuration information after you add, change, or remove any hardware in your computer.

•

Set or change a user-selectable option such as the user password.

•

Read the current amount of memory or set the type of hard drive installed.

Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference.

CAUTION:

Unless you are an expert computer user, do not change the settings for this program. Certain changes can cause your

computer to work incorrectly.

Accessing System Setup

Turn on (or restart) your computer.

After the white Dell logo appears, press F2 immediately.

The System Setup page is displayed.

NOTE:

If you wait too long and the operating system logo appears, wait until you see the desktop. Then, shut down or

restart your computer and try again.

NOTE:

After the Dell logo appears, you can also press F12 and then select BIOS setup.

System Setup

NOTE:

For the standard graphics browser only.