Dell 6100 Manual de hardware - Página 9

Navegue en línea o descargue pdf Manual de hardware para Servidor Dell 6100. Dell 6100 15 páginas. Dell poweredge 4200 servers: installation guide
También para Dell 6100: Instalación de bastidores (37 páginas), Manual complementario (4 páginas), Instalación de bastidores (34 páginas)

Imprimir página

Table 1. Microprocessor Module Jumper Settings

Jumper

Setting

J6B1

J6D1

J4D1

J4B1

J1C1

jumpered

Table 2. Processor Frequency Select

Frequency

SEL0 (Pins 1-2)

150/60 MHz

No jumper

180/60 MHz

Jumper

166/60 MHz

No jumper

200/66 MHz

Jumper

NOTE: A jumper is set on any of the three PARK settings (Pins 7-8, 9-10, or 11-12) for any

frequency selected.

Description

(default)

A processor is not installed in the

adjacent slot, the SKIP setting. This

jumper is useful only when you are

using in-target probe (ITP).

A processor is installed in the adja-

cent slot, the INCLUDE setting.

(default)

A processor is not installed in the

adjacent slot, the SKIP setting. This

jumper is useful only when you are

using ITP.

A processor is installed in the adja-

cent slot, the INCLUDE setting.

(default)

A 200/66 MHz microprocessor is

installed. See Table 2 for jumper set-

tings by microprocessor speed.

(default)

The fan heat sink jumper. Always set

to the default (passive).

The processor(s) cache is 1 MB.

The processor(s) cache is 512 KB.

unjumpered

SEL1 (Pins 3-4)

No jumper

Dell PowerEdge 6100/200 System Microprocessor Replacement

SEL2 (Pins 5-6)

No jumper

Jumper