Dell 6100 Руководство по аппаратному обеспечению - Страница 9
Просмотреть онлайн или скачать pdf Руководство по аппаратному обеспечению для Сервер Dell 6100. Dell 6100 15 страниц. Dell poweredge 4200 servers: installation guide
Также для Dell 6100: Установка стойки (37 страниц), Дополнительное руководство (4 страниц), Установка стойки (34 страниц)
Печатать страницу
Table 1. Microprocessor Module Jumper Settings
Jumper
Setting
J6B1
J6D1
J4D1
J4B1
J1C1
jumpered
Table 2. Processor Frequency Select
Frequency
SEL0 (Pins 1-2)
150/60 MHz
No jumper
180/60 MHz
Jumper
166/60 MHz
No jumper
200/66 MHz
Jumper
NOTE: A jumper is set on any of the three PARK settings (Pins 7-8, 9-10, or 11-12) for any
frequency selected.
Description
(default)
A processor is not installed in the
adjacent slot, the SKIP setting. This
jumper is useful only when you are
using in-target probe (ITP).
A processor is installed in the adja-
cent slot, the INCLUDE setting.
(default)
A processor is not installed in the
adjacent slot, the SKIP setting. This
jumper is useful only when you are
using ITP.
A processor is installed in the adja-
cent slot, the INCLUDE setting.
(default)
A 200/66 MHz microprocessor is
installed. See Table 2 for jumper set-
tings by microprocessor speed.
(default)
The fan heat sink jumper. Always set
to the default (passive).
The processor(s) cache is 1 MB.
The processor(s) cache is 512 KB.
unjumpered
SEL1 (Pins 3-4)
No jumper
No jumper
No jumper
No jumper
Dell PowerEdge 6100/200 System Microprocessor Replacement
SEL2 (Pins 5-6)
No jumper
No jumper
Jumper
Jumper
7