Dell 6100 Руководство по аппаратному обеспечению - Страница 11

Просмотреть онлайн или скачать pdf Руководство по аппаратному обеспечению для Сервер Dell 6100. Dell 6100 15 страниц. Dell poweredge 4200 servers: installation guide
Также для Dell 6100: Установка стойки (37 страниц), Дополнительное руководство (4 страниц), Установка стойки (34 страниц)

CAUTION: Never remove the heat sink from a microprocessor

unless you intend to remove the microprocessor. The heat sink is nec-

essary to maintin proper thermal conditions

Press down on the folded part of the clip with a small screwdriver to release

the clip.

heat sink

socket

release lever

Figure 7. Microprocessor Securing Clip

4. Remove the heat sink.

The thermal interface pad is bonded to the heat sink and will remain

attached to the old heat sink.

5. Push outward and then upward on the release lever to rotate the lever

to its fully vertical position (see Figure 8).

CAUTION: Be careful not to bend any of the pins when removing

the microprocessor chip from its socket. Bending the pins can perma-

nently damage the microprocessor chip.

microprocessor

securing clip hooks

over tabs on socket

(front and back)

microprocessor

socket

microprocessor

Dell PowerEdge 6100/200 System Microprocessor Replacement