Dell EMC VxRail S Series Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Servidor Dell EMC VxRail S Series. Dell EMC VxRail S Series 32 páginas.

Front panel

The front panel provides access to the features available on the front of the appliance, such as the power button, NMI button, appliance

identification tag, appliance identification button, and USB ports. The diagnostic LEDs are prominently located on the front panel. The hot

swappable hard drives are accessible from the front panel.

Figure 2. 12 x 3.5-inch hard drive chassis

Appliance identification button

NMI button

Hard drives

Video connector

Table 1. Front panel of the 12 x 3.5-inch hard drive chassis

Item

Indicator, Button, or Connector Icon

Appliance identification button

Power button

Information tag

USB management port/iDRAC Direct

Description

Enables you to locate a particular appliance within a rack. The

identification buttons are located on the front and back panels.

Press the appliance identification button to turn the appliance ID on

or off.

NOTE:

•

If the appliance stops responding during POST, press and

hold the appliance ID button (for more than five seconds)

to enter BIOS progress mode.

•

To reset the iDRAC (if not disabled in F2 iDRAC setup)

press and hold the button (for more than 15 seconds).

Enables you to know the power status of the appliance. The power

indicator turns on when the appliance power is on. The power

button controls the power supply output to the appliance.

NOTE:

On ACPI compliant operating systems, when the

power button is used to shutdown the appliance, the

operating system performs a graceful shut down the

appliance power is turned off.

Overview