Dell PowerEdge 2400 Instrucciones de instalación de la estantería - Página 23

Navegue en línea o descargue pdf Instrucciones de instalación de la estantería para Servidor Dell PowerEdge 2400. Dell PowerEdge 2400 32 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 2400: Manual de instalación (20 páginas), Manual de instalación (8 páginas), Actualización (2 páginas), Manual de activación (8 páginas), Manual de instalación (8 páginas), Manual de actualización (2 páginas), Manual (15 páginas)

Dell PowerEdge 2400 Instrucciones de instalación de la estantería
support.dell.com
Installing the PowerEdge System in
the Rack
The subsections that follow include instructions for installing the PowerEdge system.

Installing the Rack Adapters

To install the rack adapters on the computer, perform the following steps.
The following procedure is required only if you are converting a PowerEdge 2400
system from a tower chassis to a rack-ready chassis.
CAUTION: The computer may weigh up to 32 kg (70 lb) when fully loaded.
To prevent personal injury, do not attempt to move the computer by
yourself.
1.
Lay the computer on its top side (see Figure 1-9) on a piece of foam or cardboard
(to prevent damage to the computer while you remove the feet).

Figure 1-9. Computer Orientation

2.
Use a small flat-blade screwdriver to remove the plastic screw from each of the
four rubber feet on the bottom of the chassis (see Figure 1-10).
back of computer
top side
left side
front of computer
Dell PowerEdge 2400 Systems Rack Installation Guide
right side
1-11