Dell PowerEdge 2400 Instructions pour l'installation du rack - Page 23

Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation du rack pour {nom_de_la_catégorie} Dell PowerEdge 2400. Dell PowerEdge 2400 32 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 2400 : Manuel d'installation (20 pages), Manuel d'installation (8 pages), Mise à jour (2 pages), Manuel d'activation (8 pages), Manuel d'installation (8 pages), Manuel de mise à jour (2 pages), Manuel (15 pages)

support.dell.com

Installing the PowerEdge System in

the Rack

The subsections that follow include instructions for installing the PowerEdge system.

To install the rack adapters on the computer, perform the following steps.

The following procedure is required only if you are converting a PowerEdge 2400

system from a tower chassis to a rack-ready chassis.

CAUTION: The computer may weigh up to 32 kg (70 lb) when fully loaded.

To prevent personal injury, do not attempt to move the computer by

yourself.

Lay the computer on its top side (see Figure 1-9) on a piece of foam or cardboard

(to prevent damage to the computer while you remove the feet).

Use a small flat-blade screwdriver to remove the plastic screw from each of the

four rubber feet on the bottom of the chassis (see Figure 1-10).

back of computer

top side

left side

front of computer

Dell PowerEdge 2400 Systems Rack Installation Guide

right side

1-11