Dell PowerEdge 2400 Instructions pour l'installation du rack - Page 24

Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation du rack pour {nom_de_la_catégorie} Dell PowerEdge 2400. Dell PowerEdge 2400 32 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 2400 : Manuel d'installation (20 pages), Manuel d'installation (8 pages), Mise à jour (2 pages), Manuel d'activation (8 pages), Manuel d'installation (8 pages), Manuel de mise à jour (2 pages), Manuel (15 pages)

1-12

Dell PowerEdge 2400 Systems Rack Installation Guide

plastic screws (4)

rubber feet (4)

Figure 1-10. Removing the Feet

From the outside of the chassis, pry each foot from the chassis.

Turn the computer over and lay it on the bottom side.

Remove the front bezel and the left- and right-side computer covers.

See Chapter 7, "Checking Inside the Computer", in the computer's Installation

and Troubleshooting Guide for instructions on removing the bezel and computer

covers.

Remove the two screws at the front edge of the top cover (see Figure 1-11).

(Retain the screws for later use.)

7 .

Slide the top cover about one-half of an inch toward the front of the computer,

and lift it away.

bottom of chassis