Dell PowerEdge 2450 Manual de software - Página 5

Navegue en línea o descargue pdf Manual de software para Servidor Dell PowerEdge 2450. Dell PowerEdge 2450 10 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 2450: Manual de instalación (26 páginas), Manual de instalación (32 páginas), Manual de instalación (20 páginas), Información actualizada (12 páginas), Manual complementario (30 páginas), Manual de instalación del hardware (32 páginas), Manual de instalación (8 páginas), Manual (15 páginas)

support.dell.com

From the Connect to pull-down menu, select a COM port available on your Dell™

client system and click OK.

If no COM port is available and you do not have a Dell system, you will need to

contact technical support for your client system.

After you have selected an available COM port, the COM port properties window

is displayed.

Select Bits per second.

Console redirection supports 9600, 19.2K, 57 .6K, or 115.2K bps.

Set Data bits to 8.

7 .

Set Parity to None.

Set Stop bits to 1.

Set Flow control to Hardware.

10. Click OK.

Configuring the Terminal Settings

After you configure the ports, configure the terminal settings by performing the fol-

lowing steps:

In HyperTerminal, click File, click Properties, and select the Settings tab.

Make sure that the Function, arrow, and ctrl keys act as field is set to Terminal

Keys.

Make sure that the Backspace key sends field is set to Ctrl+H.

Change the Emulation setting from Auto detect to ANSI or VT100/220.

This setting should be the same as the setting you selected for the Console

Redirection field on the server.

When you click Terminal Setup, you should see a setting for the number of rows

and columns.

Change the number of rows from 24 to 25 and leave the number of columns at

80. If you do not have these settings, this is an indication that you must upgrade

your terminal emulation software.

Console Redirection