- ページ 5

サーバー Dell PowerEdge 2450のPDF ソフトウェアマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 2450 10 ページ。 Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2450 にも： インストレーション・マニュアル (26 ページ), インストールマニュアル (32 ページ), インストレーション・マニュアル (20 ページ), 情報更新 (12 ページ), 補足マニュアル (30 ページ), ハードウェア・インストール・マニュアル (32 ページ), インストレーション・マニュアル (8 ページ), マニュアル (15 ページ)

ページを印刷する
Dell PowerEdge 2450 ソフトウェアマニュアル
support.dell.com
4.
From the Connect to pull-down menu, select a COM port available on your Dell™
client system and click OK.
If no COM port is available and you do not have a Dell system, you will need to
contact technical support for your client system.
After you have selected an available COM port, the COM port properties window
is displayed.
5.
Select Bits per second.
Console redirection supports 9600, 19.2K, 57 .6K, or 115.2K bps.
6.
Set Data bits to 8.
7 .
Set Parity to None.
8.
Set Stop bits to 1.
9.
Set Flow control to Hardware.
10. Click OK.

Configuring the Terminal Settings

After you configure the ports, configure the terminal settings by performing the fol-
lowing steps:
1.
In HyperTerminal, click File, click Properties, and select the Settings tab.
2.
Make sure that the Function, arrow, and ctrl keys act as field is set to Terminal
Keys.
3.
Make sure that the Backspace key sends field is set to Ctrl+H.
4.
Change the Emulation setting from Auto detect to ANSI or VT100/220.
This setting should be the same as the setting you selected for the Console
Redirection field on the server.
When you click Terminal Setup, you should see a setting for the number of rows
and columns.
5.
Change the number of rows from 24 to 25 and leave the number of columns at
80. If you do not have these settings, this is an indication that you must upgrade
your terminal emulation software.
Console Redirection
3