Dell PowerEdge 2500 Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Servidor Dell PowerEdge 2500. Dell PowerEdge 2500 10 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 2500: Manual de configuración (10 páginas), Manual de activación (24 páginas), Manual de adjuntos (10 páginas), Manual (15 páginas)
Imprimir página
While grasping the peripheral bay handle, slide the peripheral bay backward and lift
4
the bay straight up to clear the chassis. Set the peripheral bay on a smooth work
surface.
Facing the rear of the peripheral bay, reach inside the bay and press against the center
5
of the blank slot insert to release the insert. Remove both inserts.
Installing the Drive Cage
Ensure that the 1 x 2 backplane is secured to the back of the drive cage with four
1
screws.
Insert the drive cage into the peripheral drive bay until two of the holes on the top and
2
two holes on the bottom of the drive cage align with holes in the peripheral bay. See
Figure 1-2 for the orientation on a tower system.
NOTE: To install the drive cage into the peripheral bay of a rack system , turn the cage
180° so that the 1 x 2 backplane power connector is near the bottom of the peripheral bay.
NOTE: The drive cage can be inserted into the peripheral bay from the front or the back.
1 x 2 Ba ckplane Ki t Inst allat ion Gu i d e
1-3