Dell PowerEdge 2500 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Dell PowerEdge 2500. Dell PowerEdge 2500 10 stron. Wake-on-lan (wol) support on dell servers
Również dla Dell PowerEdge 2500: Podręcznik konfiguracji (10 strony), Instrukcja aktywacji (24 strony), Instrukcja dołączania (10 strony), Podręcznik (15 strony)
Drukuj stronę
While grasping the peripheral bay handle, slide the peripheral bay backward and lift
4
the bay straight up to clear the chassis. Set the peripheral bay on a smooth work
surface.
Facing the rear of the peripheral bay, reach inside the bay and press against the center
5
of the blank slot insert to release the insert. Remove both inserts.
Installing the Drive Cage
Ensure that the 1 x 2 backplane is secured to the back of the drive cage with four
1
screws.
Insert the drive cage into the peripheral drive bay until two of the holes on the top and
2
two holes on the bottom of the drive cage align with holes in the peripheral bay. See
Figure 1-2 for the orientation on a tower system.
NOTE: To install the drive cage into the peripheral bay of a rack system , turn the cage
180° so that the 1 x 2 backplane power connector is near the bottom of the peripheral bay.
NOTE: The drive cage can be inserted into the peripheral bay from the front or the back.
1 x 2 Ba ckplane Ki t Inst allat ion Gu i d e
1-3