Dell PowerEdge 850 Información actualizada - Página 2
Navegue en línea o descargue pdf Información actualizada para Servidor Dell PowerEdge 850. Dell PowerEdge 850 18 páginas. Information update - dell openmanage server support kit version 4.3
(.pdf)
También para Dell PowerEdge 850: Actualización de la información de diagnóstico del sistema (2 páginas), Manual de instalación (28 páginas), Manual del usuario (23 páginas)
Imprimir página
Figure 1. Installing and Removing the PCI Fan Module
1
5
PCI fan
1
intrusion switch connector
4
Installing the PCI Fan Module
1 Place the PCI fan module over the mounting holes in the system chassis and install the two screws to
connect the mounting bracket to the chassis. See Figure 1.
2 Connect the chassis intrusion switch to the INTRUSION_SWITCH connector on the system board.
3 Connect the fan module's power cable to the connector on the system fan assembly.
4 Route the cables connected to the daughter card through the slot on the mounting bracket.
5 Close the system. See "Closing the System" in the Installation and Troubleshooting Guide.
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved. Printed in Malasia.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Red Hat is a registered trademark
of Red Hat, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
2
screws (2)
2
fan power cable
5
3
chassis intrusion switch
3
4