Dell PowerEdge M620 Manual técnico - Página 24

Navegue en línea o descargue pdf Manual técnico para Servidor Dell PowerEdge M620. Dell PowerEdge M620 44 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M620: Información actualizada (38 páginas), Notas de publicación (27 páginas), Manual (25 páginas), Manual del usuario (23 páginas), Manual de información importante (35 páginas), Manual de actualización (32 páginas), Manual de actualización (28 páginas), Manual del usuario (26 páginas), Manual del usuario (22 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual técnico (46 páginas), Manual técnico (49 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Imprimir página
Dell PowerEdge M620 Manual técnico
Table 13 lists the available Select Network Adapter options and their supported features for the
M620.
Features
Ports x link
speed
Supported
speed
SR-IOV
ISCSI HBA
FCoE
Switch
independent
partitioning
DCB
DCB with
iSCSI TLV
Ports x link
speed
1
Only 10GbE ports have iSCSI HBA support.
2
Only 10GbE ports have FCoE support.
3
Only 10GbE ports have switch independent partitioning support. The maximum number of
partitions supported is eight (four partitions per 10GE port).
4
Only 10GbE ports have DCB support.
5
Only 10GbE ports have ISCSI TLV support.
With M620, the job of deploying, updating, monitoring, and maintaining the Select Network
Adapters is fast and easy. System management integration features include the following:
Pre-boot: Use the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level.
Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-thru feature for sensory information.
Automation of firmware and driver version deployment upon component replacement.
Automatic monitoring of NIC status and notification on SNMP traps.
Local or remote re-configuration of any NIC, physical or virtual.
PXE boot enabled on all LOM and NDCs for ease of use.
Boot from SAN (iSCSI, FCoE) configuration for networking devices through the USC.
PowerEdge M620 Technical Guide
24
®
®
Broadcom
Intel
57810S KR
KR
2x10Gb
2x10Gb
1Gb and 10Gb
1Gb and 10Gb
Not supported
Supported
1
Supported
Not supported
Not supported
Supported
3
Supported
Not supported
Not supported
Supported
Not supported
Supported
2x10Gb
2x10Gb
®
X520
QLogic
QMD8262 KR
2x10Gb
10Gb only
Not supported
1
Supported
2
2
Supported
3
Supported
4
4
Supported
5
5
Supported
2x10Gb