Dell PowerEdge systems 6300 Información sobre la instalación - Página 5

Navegue en línea o descargue pdf Información sobre la instalación para Servidor Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 6 páginas. Systems 1 x 2 backplane
También para Dell PowerEdge systems 6300: Información sobre la instalación (6 páginas), Manual de instalación (28 páginas), Instalación de bastidores (37 páginas), Manual del usuario (42 páginas), Manual de instalación (8 páginas), Instalación de bastidores (34 páginas), Manual de instrucciones de instalación (12 páginas), Manual de sustitución (3 páginas)

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH6&6,&DEOH

NOTE: The SCSI cable installation described in this document is a typical installation

of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable

differently, depending on redundant arrays of independent disks (RAID) configurations

and the existence of SCSI peripheral cards. Refer to your operating system documen-

tation for information on how to set up your SCSI devices.

To install the SCSI cable to the 1 x 2 backplane, perform the following steps:

In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has

two connectors at one end and one connector on the other end. See Figure 3.)

bottom drive

connector

SCSI cable

)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5

top drive connector

SCSI controller

on system board