Dell PowerEdge systems 6300 Kurulum Bilgileri - Sayfa 5

Sunucu Dell PowerEdge systems 6300 için çevrimiçi göz atın veya pdf Kurulum Bilgileri indirin. Dell PowerEdge systems 6300 6 sayfaları. Systems 1 x 2 backplane
Ayrıca Dell PowerEdge systems 6300 için: Kurulum Bilgileri (6 sayfalar), Kurulum Kılavuzu (28 sayfalar), Raf Kurulumu (37 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Kurulum Kılavuzu (8 sayfalar), Raf Kurulumu (34 sayfalar), Kurulum Talimatları Kılavuzu (12 sayfalar), Değiştirme Kılavuzu (3 sayfalar)

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH6&6,&DEOH

NOTE: The SCSI cable installation described in this document is a typical installation

of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable

differently, depending on redundant arrays of independent disks (RAID) configurations

and the existence of SCSI peripheral cards. Refer to your operating system documen-

tation for information on how to set up your SCSI devices.

To install the SCSI cable to the 1 x 2 backplane, perform the following steps:

In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has

two connectors at one end and one connector on the other end. See Figure 3.)

bottom drive

connector

SCSI cable

)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5

top drive connector

SCSI controller

on system board