Dell PowerEdge systems 6300 Kurulum Bilgileri - Sayfa 3

Sunucu Dell PowerEdge systems 6300 için çevrimiçi göz atın veya pdf Kurulum Bilgileri indirin. Dell PowerEdge systems 6300 6 sayfaları. Systems 1 x 2 backplane
Ayrıca Dell PowerEdge systems 6300 için: Kurulum Bilgileri (6 sayfalar), Kurulum Kılavuzu (28 sayfalar), Raf Kurulumu (37 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Kurulum Kılavuzu (8 sayfalar), Raf Kurulumu (34 sayfalar), Kurulum Talimatları Kılavuzu (12 sayfalar), Değiştirme Kılavuzu (3 sayfalar)

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH'ULYH&DJH

To install the drive cage, perform the following steps:

Ensure that the drive cage is correctly assembled:

Verify that the 1 x 2 backplane is connected to the edge of the auxiliary SCSI

backplane via a 100-pin connector.

Verify that the auxiliary SCSI backplane is inserted into the enclosure on the

side of the cage and secured with one screw.

Verify that the 1 x 2 backplane is secured to the back of the cage with four

screws.

Verify that a drive rail is attached to each side of the drive cage.

Insert the drive cage into the empty peripheral drive bay until the clips on the

drive rails snap into the sides of the peripheral drive bay (see Figure 1).

drive cage

drive rail

clip

)LJXUH,QVWDOOLQJWKH'ULYH&DJH

,QVWDOOLQJWKH,

&([WHQVLRQ&DEOH

To install the I

C extension cable, perform the following steps:

Disconnect the I

C cable from the 20-pin connector on the system board and set

it to one side (see Figure 2).

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information3