Dell UltraSharp UP3218K Manual de servicio - Página 11

Navegue en línea o descargue pdf Manual de servicio para Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 páginas.
También para Dell UltraSharp UP3218K: Manual del usuario (50 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de desmontaje (6 páginas)

WARNING: Before you begin any of the procedures in this section, follow the

Safety

Instructions.

Self-Test

Your monitor provides a self-test feature that allows you to check whether your monitor is

functioning properly. If your monitor and computer are properly connected but the monitor

screen remains dark, run the monitor self-test by performing the following steps:

1 Turn off both your computer and the monitor.

2 Unplug the video cable from the back of the computer. To ensure proper Self-Test

operation, remove all digital and the analog cables from the back of computer.

3 Turn on the monitor.

The floating dialog box should appear on-screen (against a black background), if the monitor

cannot sense a video signal and is working correctly. While in self-test mode, the power LED

remains white. Also, depending upon the selected input, one of the dialogs shown below will

continuously scroll through the screen.

4 This box also appears during normal system operation, if the video cable becomes

disconnected or damaged.

5 Turn off your monitor and reconnect the video cable; then turn on both your

computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video

controller and computer, because your monitor is functioning properly.

5. Trouble Shooting Instructions

Dell UltraSharp 32 Monitor

No DP 1 Cable

The display will go into Standby mode in 4 minutes.

www.dell.com/support/monitors

Dell UltraSharp 32 Monitor

No DP 2 Cable

The display will go into Standby Mode in 4 minutes.

www.dell.com/support/monitors

UP3218K