Dell EMC VxFlex Ready Node R840 Manual del usuario - Página 38

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44 páginas.

System diagnostics and indicator codes

Drive indicator codes

The LEDs on the drive carrier indicate the state of each drive. Each drive carrier in your system has two LEDs: an

activity LED (green) and a status LED (bicolor, green/amber). The activity LED flashes whenever the drive is accessed.

The status LED indicator indicates the power condition of the drive.

Figure 10 Drive indicators on the drive and the mid drive tray backplane

Drive activity LED indicator

Drive status LED indicator

Drive capacity label

Note:

If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn

on.

Table 30 Drive indicator codes

Drive status indicator code

Flashes green twice per second

Off

Flashes green, amber, and then turns off

Flashes amber four times per second

Flashes green slowly

Solid green

Flashes green for three seconds, amber for three seconds,

and then turns off after six seconds

R840xd Owner's Guide

Condition

Identifying drive or preparing for removal.

Drive ready for removal.

Note:

The drive status indicator remains off until all drives are

initialized after the system is turned on. Drives are not ready for

removal during this time.

Predicted drive failure.

Drive failed.

Drive rebuilding.

Drive online.

Rebuild stopped.