Dell PowerVault MD3220i Series Manual de implantación - Página 26

Navegue en línea o descargue pdf Manual de implantación para Almacenamiento Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 41 páginas. Storage arrays
También para Dell PowerVault MD3220i Series: Manual de actualización (32 páginas), Instrucciones de instalación de la estantería (2 páginas), Manual de instalación (18 páginas), Información actualizada (1 páginas), Manual técnico (38 páginas), Manual (16 páginas)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

In this example we see that iSCSI1 is vmk0, iSCSI2 is vmk1, and iSCSI3 is vmk2. This is also information that

we need to note.

We can also see this in the CLI by using the following command:

esxcfg-vmknic –l

The output will look similar to this:

Interface Port Group/DVPort IP Family IP Address

Netmask Broadcast MAC Address MTU TSO MSS

Enabled Type

vmk0 iSCSI1 IPv4 10.10.5.173

255.255.255.0 10.10.5.255 00:50:56:7b:d8:3e 9000 65535 true

STATIC

vmk1 iSCSI2 IPv4 10.10.5.174

255.255.255.0 10.10.5.255 00:50:56:7e:ae:80 9000 65535 true

STATIC

vmk2 iSCSI3 IPv4 10.10.5.175

255.255.255.0 10.10.5.255 00:50:56:74:a4:e0 9000 65535 true

STATIC

We can determine this same information from the GUI.

Now that we know the vmhba# and the vmk# we can map each VMkernel Port to the iSCSI Software

Initiator. This is done through the CLI by typing the following command:

esxcli swiscsi nic add –n vmk0 –d vmhba33

This will bind the vmk0 VMkernel port to the iSCSI Software Adapter vmhba33. We then proceed to bind

all of the other vmk# to the same vmhba.

esxcli swiscsi nic add –n vmk1 –d vmhba33

esxcli swiscsi nic add –n vmk2 –d vmhba33

To verify that all of the vmk# are bound properly to the vmhba run the following command:

Page 24