Dell PowerVault MD3260 Series Manual de configuración - Página 7

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Dell PowerVault MD3260 Series. Dell PowerVault MD3260 Series 17 páginas. Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
También para Dell PowerVault MD3260 Series: Manual de hardware y software (25 páginas), Manual de instalación (11 páginas), Manual de introducción (10 páginas), Información actualizada (8 páginas), Instrucciones de instalación de la estantería (2 páginas), Puesta en marcha (2 páginas), Manual de implantación (26 páginas), Manual de implantación (24 páginas), Manual de introducción (9 páginas)

Using Fibre Channel Switch Zoning

A Fibre Channel switch allows you to connect multiple devices to the SAN without compromising bandwidth or data

throughput. Switch zoning implemented on each Fibre Channel switch hardware component using the manufacturer's

embedded utility, allows you to divide port traffic between the host server and storage array to maintain the highest level

of redundancy

The following figure shows each connection to the host server routed to an individual logical zone on the SAN. Two

physical switches provide an alternate (redundant) data path to the storage array. If a single HBA, switch or RAID

controller fails, the host server can still access data on the storage array through one of the alternate paths provided by

the switches.

NOTE: For a list of supported Fibre Channel switches, see the Support Matrix at support.dell.com/manuals.

Figure 1. Example of Switch Zoning on SAN on an MD3600f-series Fibre-Channel Storage Array

There are several different switch zoning techniques used across various SANs. When configuring zoning with your

storage array, using a 64 bit World Wide Name (WWN) to uniquely identify each component in your Fibre Channel

soft zoning ) is that it allows you to

switch fabric is recommended. An advantage of using WWN port zoning (also called

remove and/or replace cabling to and from the fabric without reconfiguring the existing zone logic.

When implemented on the Fibre Channel switch, port WWN zoning causes the host server to query the World Wide

Identifier (WWID) name of all attached physical disks and/or expansion enclosures each time it access the switch

fabric. By zoning specific ports on the host server, switch and storage array together, the switch allows the host server

to see only devices included in that zone, decreasing the amount of time it would otherwise take for the host server to

query attached, but out-of-zone, devices.